Cookie Consent by Free Privacy Policy Generator website

Login


Forgotton Password? | Register

Register

Register


Secondhand
New

The page you are looking for no longer exists.

Please look at some similar items.

Electrovoice’s EVID 6.2 is a passive 2-way loudspeaker expertly designed for voice amplification and background/foreground audio playback in venues such as small clubs, restaurants and retail outlets.
The included SAM (Strong-Arm-Mount) accommodates multiple mounting positions, and allows for a high degree of horizontal and vertical directivity.

£240 £220 VAT Free each

| Quantity: 6

£30 +VAT

| Quantity: 2

£650 +VAT

Bi-directional ribbon microphone with holder in its original case. Phantom powered. Only used once.

£50 £40 VAT Free

EZpar T6 USB is a battery-operated, tri-colour RGB LED washlight. D-Fi USB compatible for wireless Master/Slave or DMX control. It's rechargeable, lithium battery lasts up to 20 hours from a single charge and you can easily check the battery status with the built-in battery life indicator.
Convenient access to RGB colour mixing and static colours is available with or without DMX.
Built-in automated programs via the IRC-6 remote or Master/Slavemode makes control easy.

£100 VAT Free each

| Quantity: 2

£90 £50 VAT Free ono each

| Quantity: 2
Pair of alloy scaff half coupler to eye bolt.

£30 £27 +VAT

£20 +VAT each

| Quantity: 2
Perspex dome covered box stand for using LED lights at outdoor events.
Box footprint 50cm x 50cm.
54cm high with flange to hold dome.
Dome 70cm diameter.

£1000 £900 inc. VAT ono

| Quantity: 10

£250 £225 VAT Free each

| Quantity: 40
Most but not all of the hanging brackets are there, plus a load of instruction manuals and frost filters which screw into the front.
These are surprisingly bright units with a relatively narrow beam angle so give a lovely beam effect, and are really quick, I'd happily keep the working ones myself but I've already got 60 slightly smaller moving washes so it's too small a quantity for me to really use.

£700 VAT Free ono

| Quantity: 16
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.
Built from the finest 50mm ridged finish square / quad truss.
Banners shown are NOT included, but are available to order - Please Call
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.

£2360 +VAT each

| Quantity: 10

Might consider splitting £1600 VAT Free ono

| Quantity: 4
Distro Box - 63/3 in - 18x 16a out
RCBO Protection
Company Branded on top

£1500 +VAT each

| Quantity: 2

£35 VAT Free ono each

| Quantity: 5
Our ProDex staging are compatible with the standard 48mm tube legs
Aluminium ladder frame side profiles
18mm Plywood finished with a non-slip black coating

£374.99 +VAT each

| Quantity: 50
Listing is for 3 x Apple Express and 1 x Apple Extreme all with power leads
With its Wireless N connectivity and wired throughput via 1-port 10/100 LAN interface, the device allows multiple bandwidth-consuming applications to run simultaneously without interruptions.

£100 VAT Free ono

| Quantity: 4
18 mm birch ply plywood top
Top backed with a Class 0 flame retardant acoustic foam, to reduce noise and vibration
Socket in the corner takes a scaffolding tube leg which is held in position with a M12 nut
Platforms are connected to each other by bolting through pre-drilled holes along each edge
Steel is powder-coated black with rust-resistant pre-treatment

£750 £375 +VAT each

| Quantity: 50

£3500 VAT Free

£100 VAT Free each

| Quantity: 5
2x JTS CS - 1CU I-conference discussion system 50x CS - 1CH. 1x CS - 1CH Chair mans mic (ALSO GOT A COUPLE JTS i-Conference System Extension Cable Male to Female CS1 D7P-3)
Had this system a long time no longer any good to us.

£3000 +VAT

£350 VAT Free each

| Quantity: 2

£150 £115 +VAT each

| Quantity: 5

£1100 £800 VAT Free ono

| Quantity: 6

£3900 +VAT ono

| Quantity: 14
Avid Venue Profile Package
Avid Venue Surface
Monitor, Keyboard, trackball, FHO Rack, Snake card, Analogue Output Card

£9500 £7500 +VAT

£2500 £1000 +VAT ono

| Quantity: 24
These are custom made Bar fronts
That bolt to the front of Litedeck Staging
To be used as high volume bars etc.

£95 +VAT each

| Quantity: 200
Strong and durable lighting stands.
Length – large (2) 85cm when folded. Maximum height on extension 240cm.
Includes:
2 x Portaflash lighting stands 85cm when folded. Maximum height on extension 240cm.
1 x Portaflash carry case.

£120 VAT Free ono

| Quantity: 2
Professional aluminium framed stage decks, new and boxed, we have replaced this current model with a cheaper product for our general customers and so have over 70 pieces of the 2m x 1m decks and over 30 pieces of the 1m x 1m decks in stock. Therefore these are available for a special clearance price.
This stage is modular and we also supply fixtures and fittings for joining them together as well as accessories such as legs, clamps, hand rails and steps. Although these are not clearance items.
FROM £220 for 1x1 and £300 for 2x1 in QTY

From £220 +VAT ono each

| Quantity: 120
Brand new Pre selected Race Gantry System with total exterior dimensions of 3m high x 4m wide, with dual pontoon style footings.
Built from the finest 50mm ridged finish square / quad truss.
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display. These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing. We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.

£3929 +VAT each

| Quantity: 10
Hello, I can confirm that I have now successfully sold this item. Thank you for your support in the selling process Best Callum

£3200 £2800 VAT Free ono

Load more listings