SECONDHAND SOUND AND LIGHTING EQUIPMENT
The Best Place To Buy Sound Equipment, Lamps, Stages, Dance Floors
Secondhand
New
The page you are looking for no longer exists.
Please look at some similar items.
Stage Pit Barrier Angle Adjustable Corner - Cheshire
With a focus on safety, the Pit Barriers are essential for any concert or festival where secured areas need to be guaranteed. Whether as protection in the front area of the stage, as a way to work for the staff or as a Pit barrier with a breakwater function - Our Stage Barriers withstand the audience in every situation and offer the crew a good overview of the entire situation with optional running boards6x Unicol Tilting Platform Telescopic X Base Trolley Stand - Bristol
Unicol tilting platform telescopic X base trolley stand.550 x 650mm base.
Height adjustable 700 to 900mm. 300 x 450mm table top.
6 for sale.
Skytec Black Ultraviolet Light - Herefordshire
Equinox UV Cannon 400W Blacklight UltravioletUsed once
Directional Zone Array Speaker System - Wales
The system comes with everything needed for set up in a marquee or other venue.This is also a full PA system as well an above dance floor sound system.
It has full plug and play allowing this to be used by DJ’s as well as a bands (with digital drums).
8x DJ Lights - 8x Uplighters - 2x Spinning heads - Smoke Machine - Haze Machine + More!
8x DJ Lights8x Uplights (new)
4x Lightning cracker
2x Spinning heads
Smoke machine
Haze marching
4x Lasers
Stands
+Much more!
Directional Zone Array Speaker System - Wales
The system comes with everything needed for set up in a marquee or other venue.This is also a full PA system as well an above dance floor sound system.
It has full plug and play allowing this to be used by DJ’s as well as a bands (with digital drums).
15 x 15 Metal Edged Light Oak Dance Floor With Edging And Trolley - Yorkshire
15 x 15 Metal Edged light oak dance floor with edging and trolleyA few panels are a bit worn / chipped.
Trolley missing 1 wheel. Easy fix.
Will make a perfect 12 x 12 dance floor and then spare panels.
24x PAR 36 Pinspot 4 way Bar White - Bedfordshire
Ex-rental stock - in good conditionPAR 36 4 way pinspot bar in white
PowerCon in/out
Heavy Duty Storage or Touring Rack 4m - Morecambe, Lancashire
The Storage Rack is 4m long, 1.83m high and 1.15m wide Fabricated in mild steel.Used originally for touring. Always kept inside. Ply base. Very solid unit in very Good Condition. Runs on 8 large heavy duty castors (4 braked). Forklift pick up guides.
Designed to travel side by side in a standard trailer.
Junior ETC Source Four - Surrey
Regarded as the workhorse for many events this mains powered theatrical light is supplied with spare lamps, gel holders and a large collection of themed and decorative gobos.Used for high-end themed parties.
Ex-hire stock
2x Black Light Tube Holder - Herefordshire
2x Black Light Tube HolderBlack light complete with starter and UV tube
1.2m
40w
2x DB Technologies Opera 15 Active Speakers - Peterborough, Cambridgeshire
Pair of good condition 15 Inch 600 Watt active Speakers2 Separately controllable inputs XLR or Jack with XLR Mix-Out
8 Sound presets for use as monitor and on stand
Dimensions: 420 x 722 x 419 mm
Crown XLS 1002 Drivecore Power Amplifier
The Crown XLS 1002 DriveCore Power Amplifier is a professional stereo power amplifier designed to drive passive speakers with clean, reliable power.It is in good condition.
Race Start and Finish Line Truss Gantry System Style 1 - H3m x W4m - Essex
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
Banners shown are NOT included, but are available to order - Please Call
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
Load more listings