SECONDHAND SOUND AND LIGHTING EQUIPMENT
The Best Place To Buy Sound Equipment, Lamps, Stages, Dance Floors
Secondhand
New
The page you are looking for no longer exists.
Please look at some similar items.
Directional Zone Array Speaker System - Wales
The system comes with everything needed for set up in a marquee or other venue.This is also a full PA system as well an above dance floor sound system.
It has full plug and play allowing this to be used by DJ’s as well as a bands (with digital drums).
2x Lastolite Lighting Stands In Carrying Case
Strong and durable lighting stands.Length – 85cm when folded. Maximum height on extension 320cm. Three extension sections.
Includes: Lastolite 100cm Lighting Stand Heavy Duty Carrying Case, suitable for three lighting stands up to 100cm in length.
Second hand but hardly used.
10x Stage Pit Barrier Trolley For Straight 1m Elements - Takes 10 Folded - Cheshire
Stage Pit Barrier Trolley for straight 1m elementsSafety is the top priority at any concert or festival, and Pit Barriers are an essential part of ensuring secure areas.
Whether positioned at the front of the stage or front of house, Pit barriers are used to create safe working zones for staff, or serving as reliable crowd control, our Pit Barriers are designed to withstand the pressure of any audience.
2x Flame Effect Lights - Herefordshire
Inferno Blazing flame effect light.34x PAR 36 Pinspot 4 way Bar White - Bedfordshire
Ex-rental stock - in good conditionPAR 36 4 way pinspot bar in white
PowerCon in/out
4x Martin MAC 700 Profile (White) Moving Heads + 2x Flight Cases + White Wooden Stands - East Sussex
We are selling a complete set of four white Martin MAC 700 Profile moving head fixtures.Supplied in two twin flight cases for secure storage and transport.
Each unit also includes a white wooden stand, suitable for display or installation.
6x 20m 16amp Ceeform Extension Cables - Devon
6x 20m 16amp Ceeform extension Cables230V-
2P&E-
IP44 -
All made with 2.5mm Artic Cable
All are in great fully functional condition.
34x PAR 36 Pinspot 4 way Bar White - Bedfordshire
Ex-rental stock - in good conditionPAR 36 4 way pinspot bar in white
PowerCon in/out
2x 30m 32amp Ceeform Extension Leads - Devon
2x 30m 32amp Ceeform Extension Leads230V-
2P&E-
IP44 -
These are made with quality 6mm Artic Cable
Both are in great fully functional condition.
6 Inch Aluminium Edging Job Lot - Hampshire
We have a selection of 6 inch aluminium edging for sale as a job lot. Suitable as edging for dance floors or wooden subfloor transitions. Sizing and amounts below:8fts - 11
4fts - 14
2fts - 7
Corner Pairs -7
2x Chauvet DJ Intimidator Beam LED 350 - Buckinghamshire
Selling 2 Chauvet DJ Intimidator beam LED 350's in good condition with original box.The Intimidator Beam LED 350 projects a tight,4-degree, super-bright beam.
Complete with an 8-position colour wheel, a5-position fixed gobo wheel with an animation effect, and a 3-facet prism, this light cuts through haze with lightning-fast speed, creating a brilliant shaft of light and defined aerial effects.
This fixture can also serve dual roles, by utilising the frost filter you can attain an effective wash effect as well.
Complete Programmable Lighting Rig - Chichester, West Sussex
Again a fantastic response, Great website and super friendly staff. Cheers
Inflatable Stage Cover - South Lanarkshire, Scotland
8m wide, 5m deep, 4 m high.2 side doors.
Gibbons air pump included.
Race Start and Finish Line Truss Gantry System Style 1 - H3m x W4m - Essex
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
Banners shown are NOT included, but are available to order - Please Call
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
Load more listings