SECONDHAND SOUND AND LIGHTING EQUIPMENT
The Best Place To Buy Sound Equipment, Lamps, Stages, Dance Floors
Secondhand
New
The page you are looking for no longer exists.
Please look at some similar items.
Antari Silent Snow Machine S-500 - Leicestershire
Unused and Brand New Snow Machine.The nozzle is connected by a 10-Meter long hose and it can be easily rigged on a standard truss or tripod stand. Air and snow fluids are delivered to nozzle via the 10-Meter hose. Users can adjust the air volume and fluid flow rate to get the right snow effects needed, from fine snow to blizzards.
Cable Ramps - Adam Hall Defender 85100 7-Way - Hampshire
Defender Compact is an inexpensive version of the Defender III systemSupport arrangement moulded in the bottom permits Defender Compact to be laid over a run of cables
Capable of supporting the weight of crossing traffic
Black polyurethane construction with ribbed non-slip surface
10x Stage Pit Barrier Angle Adjustable Corner with Angles Settings 0°/ +90°/ -90° - Cheshire
Safety is the top priority at any concert or festival, and Pit Barriers are an essential part of ensuring secure areas.Whether positioned at the front of the stage or front of house, Pit barriers are used to create safe working zones for staff, or serving as reliable crowd control, our Pit Barriers are designed to withstand the pressure of any audience.
For added safety and flexibility, emergency gates are also available for spans of up to 4 metres.
Samsung DM55D Screen - London
Good working condition, great display.WxHxD: 48.4" x 27.8" x 2.0"
Easy to mount with VESA screw hole specs of 400×400mm, ensuring compatibility with a wide range of wall mounts and stands.
AFX Light IP65 Laser In Flight Case - Berkshire
AFX LZR1000RGB-IP-FC Weatherproof 1W RGB ILDA/DMX-Controlled IP65 Laser In Flight Case.6 / 34 DMX channels.
Various built-in effects (ceiling, tunnel, etc.).
Wireless IR remote control.
Supplied with bracket, 2 safety keys and short-cut interlock connector.
2x Portaflash Lighting Stands
Strong and durable lighting stands.Length – large (2) 85cm when folded. Maximum height on extension 240cm.
Includes:
2 x Portaflash lighting stands 85cm when folded. Maximum height on extension 240cm.
1 x Portaflash carry case.
3 Phase Electric Distribution Board - North Yorkshire
3 phase electric distribution board.570mm high, 450mm wide, 120mm deep.
In good condition
30x Astera AX7 (White) - London
Astera AX7 (White) 30 lights with accessoriesWe are selling our Astera AX7 due to an upgrade in lights some of these will need new batteries or could be plugged in when in use.
Shure 4 Way RF System - Tyne And Wear
2 Shure UR4D+ Dual Receiver - K4E4 Shure UR2 Handheld Transmitter
4 Shure UR1 Beltpack Transmitter
2 Shure UA874 WB Directional Antenna
4 Shure Beta 58 Rf Capsule
2x Lighting Stands with 8x CCT Fresnels and 2x Pulsar Dimmer Packs - Kent
8 x CCT Lighting Minuette 500w Fresnel 18/57 degree, Hook clamp, Gel Frame (7 with working bulbs)2 x Stands with T bars
2 x Pulsar 3 channel mini dimmer packs 5 amp
All sold as seen.
Single Phase 63amp Rubber Box (RUB2701) - Devon
Working 63amp Single phaseRubberbox. 1x 63amp in.
7x16amp out and 3 x 32amp out.
Over £1500 new
5m 16/3 - 16/3 Cable - Sussex
We have 1x 5m 16/3 to 16/3 cable.Race Start and Finish Line Truss Gantry System Style 1 - H3m x W4m - Essex
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
Banners shown are NOT included, but are available to order - Please Call
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
Load more listings