SECONDHAND SOUND AND LIGHTING EQUIPMENT
The Best Place To Buy Sound Equipment, Lamps, Stages, Dance Floors
Secondhand
New
The page you are looking for no longer exists.
Please look at some similar items.
2x ELLER - PH2 Manual Chain Hoist 250kg 12m (with Chainbags) - Buckinghamshire
The ELLER© PH2 manual chain hoist is a consistent development of the successful PH1 and is produced with the latest technology. Compact and lighter than the PH1 this provides better handling and a much improved construction and work stability.Less than a year old and only used once.
Race Start and Finish Line Truss Gantry System Style 1 - H4m x W8m
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
42x 12.5kg Stage Weights - Dorset
42 stage weights 12.5KG.Majority from Flints.
Have been sat in my workshop for a while, could do with a clean and a respray.
Race Start and Finish Line Truss Gantry System Style 1 - H3m x W4m - Essex
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
Banners shown are NOT included, but are available to order - Please Call
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
3x 10U Foam Shockmount 600mm Rack To Rack - London
10U Foam Shockmount, Excellent Condition (NSP Cases)Black Hexa, skids
600mm rack depth
1 with 4x Penn Elcom fans fitted with all PSU's and link cables
10x Uplighters With Wheeled Flight Case - Cambridgeshire
10 halogen PARS uplighters with spare bulb with sturdy rolling flight case.Stored well and in used maintained condition.
3x Alustage SCD24 – Clamping Clamp for Ultralight Spider Stage (set of 3) - London
Alustage SCD24 – Clamping Clamp for Ultralight Spider StageLightweight stage deck clamp, for locking Ultralight / Spider stage platforms together.
Height 14,1 mm
Width 86 mm
Depth 30 mm
Cable Ramps - Adam Hall Defender 85100 7-Way - Hampshire
Defender Compact is an inexpensive version of the Defender III systemSupport arrangement moulded in the bottom permits Defender Compact to be laid over a run of cables
Capable of supporting the weight of crossing traffic
Black polyurethane construction with ribbed non-slip surface
JBL VLA-C2100 Line Speakers In White - Gloucestershire
Two-Way Full Range Loudspeaker with 2 x 10" Differential Drive® LFThe high frequency section is horn-loaded for maximum sensitivity and optimum pattern control and features three D2415 drivers featuring 1.5” diameter annular diaphragms, 1.5” voice coils, and neodymium motors.
These have done 10hrs work. Now in their original boxes.
12 Way Line 6 XD-V75 Digital Radiomic System - Buckinghamshire
Line 6 12 way XD-V75 radiomic system with 11 x XD-V75 TBP12 transmitters, 1 Relay TBP12 transmitter, 12 x tan headset, 12 x lavalier (c/w clips & foam pop shields), racked & ready with all necessary cables. Including 1 active antenna, 2 x whip antenna. Transmitters use 2 x AA battery and are complete with belt clips. Some transmitter labels have worn off but all buttons, screens, lids etc are working and are not difficult to use/programme. As mentioned, 1 x XD-V75 transmitter has been replaced with a new Relay transmitter but still works on 12 of the 14 available channels. All transmitters each come with a transit case for mics, batteries & packs etc.30x Stage Pit Barrier Single Element Straight 1m - Black Powder Coat Aluminium - Cheshire
Whether positioned at the front of the stage or front of house, Pit Barriers are used to create safe working zones for staff, or serving as reliable crowd control, our Pit Barriers are designed to withstand the pressure of any audience.Event organisers value these aluminium barriers for their lightweight yet robust construction, which combines cost-effectiveness with easy handling.
For added safety and flexibility, emergency gates are also available for spans of up to 4 metres.
240x Scenic Stage Flats - Bristol
Good condition, not heavily used3 years old x 6 uses approx.
8 x 4ft (2x1") PAR scenic flats
Some covered in felt, vinyl, some uncovered (mixed assortment).
8x DJ Lights - 8x Uplighters - 2x Spinning heads - Smoke Machine - Haze Machine + More!
8x DJ Lights8x Uplights (new)
4x Lightning cracker
2x Spinning heads
Smoke machine
Haze marching
4x Lasers
Stands
+Much more!
9m x 6m Stage Cover - Hampshire
Custom Covers Marquee including all fabric.It is intended for installation on stage decking or on the floor with staging inside.
Sides are 3m high at the eaves
This as been used about 5/6 times for events.
Race Start and Finish Line Truss Gantry System Style 1 - H3m x W6m
Brand new Pre selected Race Gantry System with total exterior dimensions of 3m high x 4m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display. These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing. We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
Load more listings