SECONDHAND SOUND AND LIGHTING EQUIPMENT
The Best Place To Buy Sound Equipment, Lamps, Stages, Dance Floors
Secondhand
New
The page you are looking for no longer exists.
Please look at some similar items.
2x Lighting Stands with 8x CCT Fresnels and 2x Pulsar Dimmer Packs - Kent
8 x CCT Lighting Minuette 500w Fresnel 18/57 degree, Hook clamp, Gel Frame (7 with working bulbs)2 x Stands with T bars
2 x Pulsar 3 channel mini dimmer packs 5 amp
All sold as seen.
Brand New Professional Truss, Single Pipe, Ladder, Triangle and Quad - Thurrock, Essex
Stage Concepts are the UK stockist for Alustage products.We have exceptional deals for the Alustage brand Trussing products.
The ALC3 (48.3mm x 3mm) Heavy gauge truss is a perfect 4 point (Quad) truss solution. With 3mm thick poles giving the best in weight loading.
10x Uplighters With Wheeled Flight Case - Cambridgeshire
10 halogen PARS uplighters with spare bulb with sturdy rolling flight case.Stored well and in used maintained condition.
200x Staging Riser / Caster Wheel - Cheshire
Riser WheelsWill accept 48mm scaffolding size legs / poles
5x Microphone Stands - Croydon, Greater London
4x StudioSpares standard microphone stands which have had light use and are in good working order.Height extended approx 105-170cm, boom 50-85cm
1x Trojan small stand which has had very light use and is in good working order
Height extended approx 55-75cm, boom 50-85cm
White Ceiling Draping - Surrey
Ceiling Draping - 32 panels of white 40ft satin draping32 x 40ft white satin ceiling draping that has been up in an event barn. It is in good condition but does need a clean.
Brought brand new for £1760+VAT
Yamaha 01V Digital Mixer - Sterlingshire
Channels: 16 input channels, each with a 100mm motorized fader and dedicated controls.Digital Processing: 24-bit/44.1 kHz or 48 kHz internal processing for high-resolution audio quality.
Inputs: Combination XLR/TRS analog inputs for connecting microphones, instruments, and line-level sources.
Outputs: Balanced XLR main outputs, monitor outputs, auxiliary sends, and stereo headphone output.
Built-In EQ and Dynamics Processing: Four-band parametric EQ and dynamics processing on each channel, allowing precise shaping and control of individual audio sources.
50x Parquet Dance Floor Panels - Cumbria
Parquet dance floor recently restored 2 trolleys for sale.Full and half pieces.
4x Fly Frame For Nexo PS8 Speakers - Merseyside
Fly Frame for Nexo PS8 SpeakersFor suspending from truss or scaffolding bar etc.
Fully adjustable with yoke bracket.
QSC PowerLight PL 2.0HV Professional Amplifier - Merseyside
QSC PowerLight PL 2.0HV Professional Amplifier.Output power per channel - 1000w / 4 ohms.
Good working order, cosmetic wear and tear.
6 Inch Aluminium Edging Job Lot - Hampshire
We have a selection of 6 inch aluminium edging for sale as a job lot. Suitable as edging for dance floors or wooden subfloor transitions. Sizing and amounts below:8fts - 11
4fts - 14
2fts - 7
Corner Pairs -7
34x PAR 36 Pinspot 4 way Bar White - Bedfordshire
Ex-rental stock - in good conditionPAR 36 4 way pinspot bar in white
PowerCon in/out
Assorted Cables, Splitter And Adapters - West Midlands
4 x 32A/32A x 15 metre cables3 x 16A/16A x10 metre cables
16Amale and 16A female adapters
16A splitters
13A/16A cables with RCD
Assorted extension cables 13A plug and socket
4x Bank of 4 Pin Spots - Swindon, Wiltshire
Banks of four spot lightswith 16amp ceeform blue plugs
Ideal for lighting tables in marquees
In as new condition barely used
Race Start and Finish Line Truss Gantry System Style 1 - H3m x W6m
Brand new Pre selected Race Gantry System with total exterior dimensions of 3m high x 4m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display. These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing. We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
Load more listings