SECONDHAND SOUND AND LIGHTING EQUIPMENT
The Best Place To Buy Sound Equipment, Lamps, Stages, Dance Floors
Secondhand
New
The page you are looking for no longer exists.
Please look at some similar items.
2x ELLER - PH2 Manual Chain Hoist 250kg 12m (with Chainbags) - Buckinghamshire
The ELLER© PH2 manual chain hoist is a consistent development of the successful PH1 and is produced with the latest technology. Compact and lighter than the PH1 this provides better handling and a much improved construction and work stability.Less than a year old and only used once.
Elemental Lighting System + Soft Box
Strong and durable elemental light, stand and accessories.Elemental light M600
Cary bag
Black light caps long and short
Soft box / Diffuser
2x Lastolite Lighting Stands In Carrying Case
Strong and durable lighting stands.Length – 85cm when folded. Maximum height on extension 320cm. Three extension sections.
Includes: Lastolite 100cm Lighting Stand Heavy Duty Carrying Case, suitable for three lighting stands up to 100cm in length.
Second hand but hardly used.
60x Ex Hire Cable Ramp - 5 Channel DDA - Cheshire
Disabled Access / Low Profile Cable ramp - 5 channel.Ex Hire (used for 1 tour indoor).
Portaflash Lighting System Bundle
2 x Portaflash 550 lightscables, Light covers, caps, diffuser box
Umbrellas, filter holder, filters
Flash tubes
Minidome slave flash
42x 12.5kg Stage Weights - Dorset
42 stage weights 12.5KG.Majority from Flints.
Have been sat in my workshop for a while, could do with a clean and a respray.
Race Start and Finish Line Truss Gantry System Style 1 - H4m x W8m
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
32/3 Distribution Board - Sussex
We have a 32/3 distribution board for sale with 6x 16/1 outlets covered by one RCD.10x 32 Amp 230v Distribution Panel - Hertfordshire
We have a number of these 32a 230 volt IP rated mains distribution panels, each one is mounted onto a ply backing panel & is fitted with a 1 metre 32a main inlet feed cable to 6 x 16a.See form sockets, each outlet protected by it’s own RCBO (so an MCB & RCD in one) we used these for power supplies to glamping tents for one season, now just sitting on the shelf getting dusty.
6m x 6m Flat Ivory LED Starlight Roof & Gable Set (2x 6x3m Roofs + Gable, Multimode Electrics) - Kent
6m x 6m Flat Ivory LED Starlight Roof & Gable Set (2x 6x3m Roofs + Gable, Multimode Electrics)16m x 28m Vintage Spiegeltent / Spiegelhall Project - Leicestershire
Spiegelhalls / spiegeltent's are traditional temporary dance halls that moved through the villages of Europe.Very popular now as comedy venues at festivals
Also making the most incredible party venues
An incredible structure 16 x 28m
With a higher level surrounding the central dance floor
Quite unlike any other structure in the UK today.
Orbit Stage 16m Wide With Layher Base - Lancashire
It's sat on a layher stage and is 16m wide and depth is 16m also but can be reduced in 4m bays.The decking is 25mm plywood and whilst more than usable will need replacing in a couple of years.
It will hold 3000kg per arch so significantly stronger than the old aluminium ones as well as being taller.
Race Start and Finish Line Truss Gantry System Style 1 - H3m x W4m - Essex
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
Banners shown are NOT included, but are available to order - Please Call
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
105x Milos Aluminium Triangular Truss Sections - Dorset
Milos Aluminium Triangular Truss.- Baseplates x15
- 710 straight STF710- x12
- 1000 straight STF1000 x44
- 2000 straight STF2000 x22
- Corners ALF34 x10
- T Sections ATF42 x2
Load more listings