SECONDHAND SOUND AND LIGHTING EQUIPMENT
The Best Place To Buy Sound Equipment, Lamps, Stages, Dance Floors
Secondhand
New
The page you are looking for no longer exists.
Please look at some similar items.
600 SqFt x Polished Interlocking Dancefloor - Midlands
Portable Floormakers Interlocking 18mm PlyboardSections of 4'x2' and 8'x2
Approx' 600 sq ft available to make various sizes
Aluminium edging also available.
Price is per sq.ft
2x GAE Speaker System 12 Top - Kent
The GAE System 12 is a vented, full-range loudspeaker system incorporating a 12" special cone driver, a horn-loaded 1,4" N/DYM-compression driver and a passive crossover network.The hand-laminated fibre-glass horn is extremely robust and resistant to mechanical influence.
The connectors are of the Neutrik Speakon 4-pole type.
2x Stage Pit Barrier Emergency Gate (Two Pieces Foldable) - Aluminium - Cheshire
Safety is the top priority at any concert or festival, and Pit Barriers are an essential part of ensuring secure areas.Whether positioned at the front of the stage or front of house, Pit barriers are used to create safe working zones for staff, or serving as reliable crowd control, our Pit Barriers are designed to withstand the pressure of any audience.
For added safety and flexibility, emergency gates are also available for spans of up to 4 metres.
A Mixture Of Fresnel, Profile Spots And Par Cans - Scottish Boarders
Collection of theatre lightsPar cans, Prelude 30, CCT Minuette
Spot lights
Make us an offer!
16/1 - 16/1 Cable With Isolator - Sussex
We have 1x 16/1 to 16/1 cable with rotary isolator on outgoing.3x Alustage SCD24 – Clamping Clamp for Ultralight Spider Stage (set of 3) - London
Alustage SCD24 – Clamping Clamp for Ultralight Spider StageLightweight stage deck clamp, for locking Ultralight / Spider stage platforms together.
Height 14,1 mm
Width 86 mm
Depth 30 mm
Complete Classic Stage Lights Package - Bedfordshire
8 x Par 56 CansGels
Bulgin connectors and long cables
Plus extension cables Road Case
2 x heavy duty 'T' stands and programmable controller with loads of functions.
Would suit classic rock or legacy act that wants some authentic period lighting.
Orbit Stage 16m Wide With Layher Base - Lancashire
It's sat on a layher stage and is 16m wide and depth is 16m also but can be reduced in 4m bays.The decking is 25mm plywood and whilst more than usable will need replacing in a couple of years.
It will hold 3000kg per arch so significantly stronger than the old aluminium ones as well as being taller.
2x Portaflash Lighting Stands
Strong and durable lighting stands.Length – large (2) 85cm when folded. Maximum height on extension 240cm.
Includes:
2 x Portaflash lighting stands 85cm when folded. Maximum height on extension 240cm.
1 x Portaflash carry case.
JTS Push To Talk Microphone Bundle - London
2x JTS CS - 1CU I-conference discussion system 50x CS - 1CH. 1x CS - 1CH Chair mans mic (ALSO GOT A COUPLE JTS i-Conference System Extension Cable Male to Female CS1 D7P-3)Had this system a long time no longer any good to us.
105x Milos Aluminium Triangular Truss Sections - Dorset
Milos Aluminium Triangular Truss.- Baseplates x15
- 710 straight STF710- x12
- 1000 straight STF1000 x44
- 2000 straight STF2000 x22
- Corners ALF34 x10
- T Sections ATF42 x2
8x 25m 32 amp Single Phase Cables - Devon
25m 32 amp single phase cables.x8 for sale as a job lot.
£75 each
Used on site at a single venue, not hired out.
See our other electrical items for sale.
4x Bank of 4 Pin Spots - Swindon, Wiltshire
Banks of four spot lightswith 16amp ceeform blue plugs
Ideal for lighting tables in marquees
In as new condition barely used
Race Start and Finish Line Truss Gantry System Style 1 - H3m x W4m - Essex
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
Banners shown are NOT included, but are available to order - Please Call
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
30U Foam Shockmount 650mm Rack To Rack - London
30U Foam Shockmount, Excellent Condition (NSP Cases)Black Hexa, 100mm wheels (2 with brake)
650mm rack depth
8x Penn Elcom fans fitted with all PSU's and link cables
Load more listings