SECONDHAND SOUND AND LIGHTING EQUIPMENT
The Best Place To Buy Sound Equipment, Lamps, Stages, Dance Floors
Secondhand
New
13x Litedeck Step Units And Supports - Derbyshire
Prolyte Litedeck Step Units and Step Supports for sale in good condition.(Handrails also available in seperate advert). Together they can make a 13 step 2.4m high staircase with handrail on both sides.
Heavy Duty Triangular Truss Arches - Derbyshire
Can be used as arches or octagon or as part of a bigger rig.Includes coupler eggs, spigot pins and R-clips for each joint.
JBL VLA-C2100 Line Speakers In White - Gloucestershire
Two-Way Full Range Loudspeaker with 2 x 10" Differential Drive® LFThe high frequency section is horn-loaded for maximum sensitivity and optimum pattern control and features three D2415 drivers featuring 1.5” diameter annular diaphragms, 1.5” voice coils, and neodymium motors.
These have done 10hrs work. Now in their original boxes.
4x JBL VLA-C2100 Line Speakers In White - Gloucestershire
Two-Way Full Range Loudspeaker with 2 x 10" Differential Drive® LFThe high frequency section is horn-loaded for maximum sensitivity and optimum pattern control and features three D2415 drivers featuring 1.5” diameter annular diaphragms, 1.5” voice coils, and neodymium motors.
These have done 10hrs work. Now in their original boxes.
3x QSC RMX 2450 PowerAmps In A Protective Box - London
3x QSC RMX 2450 Power AmpsTwo-Channel Power Amplifier
2400 W peak power
31 channel graphic equaliser
Directional Zone Array Speaker System - Wales
The system comes with everything needed for set up in a marquee or other venue.This is also a full PA system as well an above dance floor sound system.
It has full plug and play allowing this to be used by DJ’s as well as a bands (with digital drums).
24x PAR 36 Pinspot 4 way Bar White - Bedfordshire
Ex-rental stock - in good conditionPAR 36 4 way pinspot bar in white
PowerCon in/out
6 Inch Aluminium Edging Job Lot - Hampshire
We have a selection of 6 inch aluminium edging for sale as a job lot. Suitable as edging for dance floors or wooden subfloor transitions. Sizing and amounts below:8fts - 11
4fts - 14
2fts - 7
Corner Pairs -7
42x 12.5kg Stage Weights - Dorset
42 stage weights 12.5KG.Majority from Flints.
Have been sat in my workshop for a while, could do with a clean and a respray.
10x 32 Amp 230v Distribution Panel - Hertfordshire
We have a number of these 32a 230 volt IP rated mains distribution panels, each one is mounted onto a ply backing panel & is fitted with a 1 metre 32a main inlet feed cable to 6 x 16a.See form sockets, each outlet protected by it’s own RCBO (so an MCB & RCD in one) we used these for power supplies to glamping tents for one season, now just sitting on the shelf getting dusty.
10x 32 Amp 3 Phase 16 Metre Cables - Hertfordshire
We have a number of these 32a 3 phase cables, made with HO7 RNF 6mm cable to the latest harmonised cables.Each is approx 16 metres long (15m + a wee bit of spare).
Parquet Oak Dance Floor 21ft x 21ft - Stoke on Trent, Staffordshire
Parquet Oak Dance Floor 21ft x 21ftMade up from 49 3ftx3ft panels
Bronze coloured edging strip for 3 sides
3 Trolleys
Some spare panels
16m x 28m Vintage Spiegeltent / Spiegelhall Project - Leicestershire
Spiegelhalls / spiegeltent's are traditional temporary dance halls that moved through the villages of Europe.Very popular now as comedy venues at festivals
Also making the most incredible party venues
An incredible structure 16 x 28m
With a higher level surrounding the central dance floor
Quite unlike any other structure in the UK today.
64amp Single Phase Cable & Distribution Board - Hampshire
Cables are in the following lengths2 x 15m
1 x 10m
Distribution boards has the following outlets
7 x 16m amp
1 x 32 amp
9m x 12m Festival Stage - Hampshire
Self Climbing Roofinc 8m x 10m stage deck
Hand rails and steps.
Turnkey package
1800kg payload on roof truss for production equipment.
Orbit Stage 16m Wide With Layher Base - Lancashire
It's sat on a layher stage and is 16m wide and depth is 16m also but can be reduced in 4m bays.The decking is 25mm plywood and whilst more than usable will need replacing in a couple of years.
It will hold 3000kg per arch so significantly stronger than the old aluminium ones as well as being taller.
Load more listings
