SECONDHAND SOUND AND LIGHTING EQUIPMENT
The Best Place To Buy Sound Equipment, Lamps, Stages, Dance Floors
Secondhand
New
The page you are looking for no longer exists.
Please look at some similar items.
|
NEC VT-440 LCD Projector - Sittingbourne, Kent
is now sold, thanks
Jim
19x KAM Lighting Bars LED - West Yorkshire
LED Mulitcolour Lighting BarDMX Controllable
Lightweight and Portable
12x 3W RGB LEDs
Provided in a Flight Case.
Job Lot (Qty19)
4x Chrome Par 64 - Derbyshire
4 chrome par 64Used but good condition c/w 16a plug
ETC Smartfade and Flightcase - Edinburgh
ETC Smartfade 48_96 lighting console c/w PSU and flightcaseNot PAT tested
Sennheiser EW 100 G3-1G8 Bodypack Set / Lapel Mic & Receiver - Liverpool, Merseyside
Great condition used for conferences with silver case lapel mic & receiver.38x Brand New - Multiple cables XLR / Speakon / phono / RCA - Kent
Brand new - never been used in packaging17x 6M - 20m XLR cable M/F
2x 4m Speakon, 8x 15m Jack to Speakon
2x 15m Phono plugs RCA, 7x 2m XLR to phono
2 x 2m , 1 x 6m
LiteConsole Foldable DJ Booth - Bedfordshire
Portable, Stylish DJ Booth in excellent condition to elevate your show.Alloy Swivel Clamps - Derbyshire
Pair of alloy swivel clampsMobile Stage 60sqm Extending to 80sqm - West Yorkshire
10m x 6m with 2.5 m PA wings.This is a unique stage, as we purchased all the decking and roof to extend this from 10 m wide, to 15 m, PA can then be ground stacked or flown separately.
The stage only been used once is in perfect condition.
The applied construction solutions allow for trouble-free and quick preparation of the stage for use
Only used once!
Dancefloor 15ft x 15ft Wood Effect Finish - Somerset
Moulded Panel Dancefloor comprising of 100 x Panels comes with aluminium edging. Simple lock together panels no tools required.Must be laid on a level surface. Easy for one person to lay the floor and very easy to clean with power washer.
Excellent condition and currently being used for events.
Briteq Beamspot1 Triac WW Projector - Nottinghamshire
Revolving door light brand new never used.DMX Shutter - Bristol
Dmx controlled Projector shutter packed full of features not seen before in a product of this type!Can operate in any location around the projector.
Fully adjustable open and closed position via on board rotatory controls, no need to unbolt the shutter blade
Shutter opening can be trimmed to enable fast and minimal movement.
Easy dmx addressing - no tools required.
Laser Follow Spot Light - Colchester, Essex
Laser follow spotLEDJ Prolight UK
2x Par 64 LED Lights - West Midlands
2 x Brushed silver Par 64 LED lights with dmx and colour changingTripod Stands - Derbyshire
Pair of Doughty black tripod stands 11' 6" as newBil-Jax Staging (92 square meters) - East Yorkshire
Bil-Jax staging for sale.Photograph shows an example setup of 7.2m x 3.6m.
Includes decks, handrails, sets of steps and other components.
Decks are 1.2m x 1.2m in size, half decks being 1.2m x 0.6m
Cariboni Metal Halide 150w HQI Floods with Base Plate - Marquee Lighting - Dundee, Scotland
Super Punchy and great for lighting the exterior of marquees and buildings.Birch Ply base plate included
16A Plug included.
Used 3200k Lamp included and will be removed and wrapped for transit.
Martin Audio Sound System with C-Audio Amps and Controller - Nottingham, Nottinghamshire
Hi Amanda,
Wonderfully the sound system has been sold.
Thanks so much for your help.
Best,
Sam
28x 1.5mt Steel Staging Legs with Wheeled Transport Crate - Stage - Dundee, Scotland
Wheeled crate with 28 Steel Staging Legs1.5mt Length + End Bung
6.25kg each leg
Race Start and Finish Line Truss Gantry System Style 1 - H3m x W4m - Essex
Brand new Pre selected Race Gantry System with total exterior dimensions of 4m high x 8m wide, with dual pontoon style footings.Built from the finest 50mm ridged finish square / quad truss.
Banners shown are NOT included, but are available to order - Please Call
We offer a large selection of pre packaged, ready-to-go truss bridge systems for athletic racing, motorsport, marathons and product banner display.
These systems include all necessary fixtures and fittings and are easy to construct with just an M10 spanner thanks to the unique design of the trussing.
We can also supply any type of custom printed banners or hoardings you may require, along with a huge selection of lighting effects, smoke effects and PA systems.
If pre packaged is not what you need then we offer a bespoke 3D cad design service and can create any truss based structure you require, built to order at our UK manufacturers, so please call us for a quotation and expert guidance.
Load more listings