Non pyrotechnic, cold firing technology spark fountain effects system. Perfect for corporate events, music and live performance and a popular wedding feature.
Utilising the latest technology, the CoolSparx system provides a perfect solution for those wishing to use a pyro type spark fountain effect at indoor events without needing specialist licenses and insurances that traditional pyro requires.
Many venues and events hosting locations have banned the use of traditional pyrotechnics completely due to the inherent personal safety and building fire risk. The CoolSparx gives the desired effect but is completely safe to use around both people and materials due to its cold firing technology meaning the sparks are only low temperature to begin with, then are cooled near instantly as the enter the air. The fountain is safe enough to place your hand into the sparks.
Full DMX control or remote operation. The Units come supplied with both a wired and wireless remote controls.
Expensive gerb pyro replacements are replaced on the CoolSparx with a simple and convenient powder system which is weight measured and timer controlled by the use of an RFID swipe card that is supplied with every powder refill. This ensures the CoolSparx cannot be damaged by either being fired when empty or if the incorrect powder has been introduced.
Each 200g powder refill will last 20 - 30 minutes of continuous firing (time dependent on height setting) so a standard burst fire of approximately 1 minute will give you upto 30 uses from one refill, which is a significant money saving over traditional gerb pyro charges.
Only official SparxFuel comes with the required swipe card to operate the CoolSparx system
SparxFuel Powder - 200g refill with swipe card are available at £70+vat
Preheating - < 8 Minutes Fountain Height - Indoor: 0-3m. Outdoor: 0-5m Wired Pushbutton Controller Wireless Transmitter and Receiver 220V / 50Hz Rated Current - 7.0A Rated Power - 850W